capecodhemi
My Groups
My Subscriptions
AWEISII |
Posted October 18, 2005 wasn't there a recall or tsb on the 20" wheels cause they were warping the rotors when stopping hard?? i did a search but didn't find what i was looking for!! |
CaliBadBee |
Posted October 21, 2005 Use a torque wrench to tighten those babies down, torque sticks aren't really all that accurate, but definately dont use the impact gun by itself to tighten them down. |
wbw1 |
Posted June 30, 2005 i have been checking on controllers for the zex kit that i have , i have found out that the controllers will not work w/ the zex NMU , this is my plan too install second full nitrous kit , l... |
slowcooker |
Posted July 3, 2005 Thankyou 04 SW Hemi thats just what i was looking for |
|
capecodhemi |
Posted May 4, 2005 Gibson has came out with a new header for the hemi that bolts right to factory y-pipe. Its a log manifold header thats flow bench tested at 25'lbs of torque between 1600 and 3600 rpm. T-304 s... |
04 SW Hemi |
Posted May 25, 2005 I think they are pretty neat in some ways with the ceramic coating and the good torque numbers. No welding also. Price is a little heavy for what they are. If you could get a set for ... |
turri |
Posted February 12, 2005 I'm looking at ordering a SNUGLID SL, but I have a couple of questions- 1. I have an OEM bed liner that goes over the top lip of the tailgate and the front of the bed. (not over the sid... |
larmo99ram |
Posted February 22, 2005 I put on a Truxedo top, the low profile and it is holding up great. It uses velcro down the sides and has a tensioner on it and it works great, allows me to use my ram as a truck with little... |
kizzerd |
Posted January 23, 2005 Does anyone have any manuals or info on rebuilding a 98 Dodge Ram 1500 2WD tranny. What kind of tranny do they use anyway? |
Barracuda |
Posted January 26, 2005 If its gotta a 318(5.2l) its got a 42RE and if its got a 360(5.9l) its a 46RE. Look up AR Transmissions store on Ebay. He has the manual you need for $15.50. Cheapest around. Getting ready to... |
Register and Login to leave comments!
Hello, what brings you to my page?