March 24, 2014Hello. This is probably worn out by now, but here goes again. I have an 87 Dakota 2wd 3.9L/5speed. I am just finished with a `76 360" punched .060 over with good heads, cam, intake, 4bbl,etc. What motor mounts have been used for this swap? I know Schumaker makes excellent ones. Also will later model 5.2/5.9 headers work with this swap? I am also using a 727 w/reverse pattern manual valve body. Last thing I need info on is a rear end. Thought about an 8 3/4 from a late 60`s B body but thought about a late model Jeep rear (possible posi). Is this a good choice for a rear end? The 1 leg in it now won`t last under the v8`s power. Any advice, info or help is deeply appreciated. Thanks
Subscribers : hotrod1961
March 24, 2014Sorry not my field of expertise but welcome to the site!
DTW Webmaster & Nebraska Chapter President. --- SITE PROBLEMS? --- hit me at email@example.com